calorific efficiency
英 [ˌkæləˈrɪfɪk ɪˈfɪʃnsi]
美 [ˌkæləˈrɪfɪk ɪˈfɪʃnsi]
热效率；热值；卡值；发热量
双语例句
- The liquid crystal has been used to measure the calorific efficiency and heat transfer coefficient of the film for the discrete slots.
本文采用液晶瞬态测试技术对带离散缝平板的气膜加热效率及换热系数进行了测量，并把测量结果与数值模拟结果进行了对比。 - Experiment and theoretical value proved that the additive can lower ignition temperature, hasten the coal combustion and calorific efficiency.
通过实验测定、理论计算和文献查找，证明添加剂能够降低燃点、促进燃烧、增加热值，并提出了添加剂的作用机理。 - The coefficient for excess air is controlled by the self-searching optimum control strategy to obtain the highest calorific efficiency.
按最佳热效率原则用自寻最优控制过剩空气系数。 - The facile measuring method of true calorific efficiency for salt bath
盐浴炉真实热效率的简易测定法 - The optimum control of calorific efficiency for thermionic heater
热媒加热炉效率优化控制 - The optimization of furnace charging number& an application of true calorific efficiency
最佳装炉量的确定&真实热效率应用之一 - Based on the study of coal combustion, the main reason of low calorific efficiency was analyzed.
从煤炭的燃烧过程出发，分析了燃煤过程中热值低的主要原因。 - In this paper we introduce the optimizing process of furnace charging number, by using the true calorific efficiency to determine the relationship between furnace efficiency and furnace charging number, i.e. η′-N relationship.
本文介绍了利用真实热效率确定炉子效率与装炉量的关系（η′-N）从而优选装炉量的方法。 - At present stage, the maximum calorific value of product gas was 3.84MJ/Nm3 and the highest coal conversion efficiency was 73.7%.
在该试验阶段获得的煤气的最高热值为3.84MJ/Nm3，最高碳转化率为73.6%。 - Based on the theoretical analysis the configuration of the source is improved and the calorific efficiency is increased, so that the temperature of the ionizer can be reached up to 1300 K and the lifetime of the heater core of the ionizer is prolonged.
在此基础上，改进了结构，不但将电离器温度提高到1300K，且延长了其热丝寿命。 - The effects of the feed rate of air, steam and coal on bed temperature, gas composition, calorific value, carbon conversion and gasification efficiency are predicted and analyzed with the model.
在此基础上，还就空气加入量、蒸汽加入量及加煤速率对床温、煤气组成、煤气热值、碳转化率和冷煤气效率的影响做了预测和分析。 - The Input/ Loss Method is a unique process which allows for complete thermal understanding a power plant through explicit determinations of fuel and effluent flows, fuel chemistry, fuel heating ( calorific) value and thermal efficiency.
输入/损失技术，是一项独一无二的技术，它通过对燃料及其渗漏的流动、燃料化学性质、燃料热值和热效率的分析，为全面理解电厂热力过程创造了条件。 - It was discussed that feasibility which develops the sterilizer into steam vacuum pulse sterilizer according to tested data and electric heat efficacy and oil calorific efficiency.
根据实验数据、电加热功率和热效率，讨论了将本灭菌器改进为脉动真空压力蒸汽灭菌器的可能性。 - Optimizing Control of Multivariable Calorific Efficiency in a Furnace
加热炉多变量热效率优化控制 - Measurement on Calorific Efficiency and Heat Transfer Coefficient of Film for Discrete Slots and Numerical Simulation
离散缝气膜加热效率及换热系数的测量和数值模拟 - The calorific efficiency of drying system is an important index to measure the performance of a drying equipment. It is mainly determined by waste gas temperature.
干燥系统热效率是衡量干燥设备性能的重要指标，它主要是由排风（尾气）温度决定。 - On the other hand, the calculation of calorific efficiency on line can be done with the help of powerful calculation and control abilities, thereby the furnace works in high efficiency.
另一方面利用PNA可编程调节器强大的计算控制能力，完成加热炉在线热效率计算寻优，从而使加热炉在较高的效率下工作。 - Application of dry ice cleaning on increasing calorific efficiency of polyester heater
干冰清洗在提高聚酯热媒炉热效率中的应用 - Incineration technology of controlled air oxidation ( CAO) was imported first time in our country in accordance with the low calorific value of our country's waste, operation parameters were adjusted in design. Operation efficiency was raised by technology remaking.
我国第一次引进CAO垃圾焚烧炉（ControlledAirOxidation）的焚烧工艺，针对我国垃圾热值低的情况，在设计上对运行参数加以调整，通过技术改造提高了运行效率。 - The separation of power machine and compressor gives a available way of improving calorific efficiency and performance per litre.
动力机与压缩机的分离为动力机的热效率和升功率的提高提供了有效途径。 - The influence of five factors ( temperature, ER, humidity, steam added and CaO added) on such parameters as gas product composition, calorific value, gasification efficiency and gas production rate of biomass molding fuel was analyzed.
主要考察了（温度，ER，湿度，添加水蒸气，添加CaO）对生物质成型燃料产气组成、热值、气化效率以及产气率等参数的影响。 - Stirling Engine can make use of air as working medium, and it maintains several great characteristics such as using low calorific value energy, remarkable theoretical heat efficiency, tiny environment contamination and taking low comprehensive cost.
斯特林发动机可以空气作为工作介质，利用多种低热值能源，理论热效率高、环境污染小，综合成本低廉、维护方便且易于推广。 - Four typical parameters, volatile content, calorific value, secondary air distribution and oxygen fraction in flue gas, are used as inputs, while boiler efficiency is output.
选取最重要的有代表性的四个参数&煤的挥发份、发热量、二次风配风和烟气氧量，作为输入参数，锅炉效率作为输出参数。 - The gas calorific value and gasification efficiency presented a trend of first increasing and then reduction with the increasing of moisture of materials, the humidity of materials should be controlled within a certain range, which is beneficial for gasification.
燃气热值和气化效率随物料的含水率提高呈现先增后降的变化趋势，原料的湿度需要控制在一定范围内对于气化有益。